Very,very good manual.It was very explicit and readble.It was helpfull.Thanks.
Text excerpt from page 7 (click to view)
DECK MECHANISM ADJUSTMENT
MEMO
CURRENT PICK UP POSITION ERROR RATE SIZE AVERAGE ERROR RATE
SECTOR : 200145 0045 0065
ERROR RATE (HEXADEAMAL)
Fig.11. Adjusting Screen Display
3. Adjustment Procedure
1. Insert Disc(Only Open/Close Key Pressing) 2. Wait Until the Sector Display is about 200,000 (Fig.11) 3. Adjust R-Skew adjusting Point until the Error rate has Minimum rate with L-wrench (3mm). 4. Adjust T-Skew Adjusting Point until the Error rate has Minimum rate. 5. Repeat No. 3, 4 adjusting procedure until the Error rate have Minimum rate. 6. Error rate; SVC-3561 Disc=below 30 and TDV-533 Disc=below 100. If not, Please confirm Play ability on screen. # You can watch the screen when pressing the Stop key after the Adjusting is finished, Then perform Play and Scan/Skip operation at Chapter1 and Chapter16 and confirm screen condition, normal or abnormal. � Please obtain these software for Adjusting through our Global Cyber Service Center(GCSC). � The location is http://biz.lgservice.com & Web Site for End users & Software updates & Product : DVD Player & Search.
